TRICOR's Model 807 DOI and Haze meter, replacement for Hunter Dorigon II

Overview

TRICOR's DOI and Haze Meter is ideally suited for measuring flat, non-textured high reflectance surfaces. The Model 807A design is in accordance with ASTM E430 and ASTM D5767 (method A) and is used to measure ±3 degrees around the specular lobe centered at 30 degrees in approximately 220 increments. That's an angular sample size of 1 sample per 1.6 minutes of arc! This allows differentiation between samples with very small differences in reflectance characteristics. Verified replacement for the older Hunter Dorigon II unit.

Operators need only press 1 button on the unit to obtain a measurement in less than 4 seconds. Computed results include Rs (specular gloss), DOI (Distinctness-of-image gloss) and haze (2 & 15 degrees). The device can help quantify reflectance, doi, haze, sheen, reflection directionality, reflectance haze, metallic brightness for metals, glass, ceramics, painted surfaces and any other high reflectance surface. The system was designed as a direct replacement of the obsolete Dorigon II.

The system is operated via RS232 from any PC (w/Windows™) or Palm Personal Digital Assistant. Quickly switch from a mirror standard to a black glass standard for non-metallic measurements. Statistical sample averaging is performed. Each measurement is time and date stamped. Data can quickly be downloaded directly into a MS Excel spreadsheet.

Low power consumption and power saving features allows standard AA NiCd type batteries to be used. Battery life is in excess of 10 hours of continuous operation without need for new batteries. An optional ac adapter and battery charger is available for use with rechargeable batteries. A Non-contact optional configuration is also available.

The Model 807A can be configured for either contact or non contact measurements. The non contact configuration allows easy integration into a production line.

Specifications and Features

Standards	ASTM E430-97 Method A ASTM D5767 Method A
Geometry	Illumination @30° Linear Sensor Centered @30° 15° Haze Sensor Centered @15°
Measured Parameters	Specular Gloss Distinctness-of-Image Reflection Haze 2° Reflection Haze 15° Directionality (Indirect)
Measurement Area	.21 in (5.3 mm) Diameter
Angular Measurement Limits	± 2.98 degrees 220 active pixels
Light Source	White LED
Measurement Time	< 4 seconds
Batteries	2 x 1.5 Volt AA 10 hrs (Continuous Operation)
Dimensions (H x W x D)	9 x 7 x 2.4 (in) 22.9 x 17.8 x 6.1 (cm)
Weight	4.1 lbs. (1.86 kg)
Operating Temperature	50° - 100°F (operating) (10° - 38°C) 32° - 140°F (storage) (0° - 60°C)
Relative Humidity	< 85% @ 95°F (35°C)
Dorigon II Replacement

Some Typical Applications

• Dorigon II Replacement
• Metal
• Painted products
• High polished/glossy surfaces
• Tiles
• Pottery
• Chrome Finishes
• Countertops
• Flooring
• Glossy Paper
• Can be customized to measure your product's appearance characteristics

System Component

• Measurement Device
• DOI/Haze Meter Application Software
• 10 ft (3 m) Interface Cable
• Calibration Mirror (Optional)
• Calibration Black Glass (Optional)
• AC Recharger / Adapter (Optional)
• PDA w/Interface Software (Optional)
• Carrying Case (Optional)

Versatility

• Contact Operation
• Non-Contact Operation
• In-line measurement

Customer Requirements

• Personal Computer: Pentium III @ 400 MHz running Windows® 9X, NT, 2000, XP with RS-232 Interface.

Sample Screenshots

Application Screen	Spread Sheet Data
Scan Graph	Calibration Dialogue

• Home
• Electronic Contract Manufacturing
• Medical Device Design & Manufacturing
• Contract Engineering
• Software Design
• Products
• About Us
• Contact Us